If the operator wants to operate the cantilever crane safely, he needs to make adequate preparations. It is also necessary to clarify the construction conditions and arrange specific schemes in combination with their own conditions. Of course, it belongs to mechanical equipment. In the process of use, equipment failure is inevitable. Therefore, inspection is usually required during daily use. What are the main daily inspection items of the cantilever crane, which are the concerns of the majority of users.
　　Before use, assembly is usually required. There are many types of assembly. Users should choose the appropriate assembly type according to their own needs. At present, the main assembly method is in the form of column. However, after assembling to a certain length, the corresponding position should be replaced and fixed with independent equipment. Of course, there are many precautions during the inspection. We should strictly follow the requirements of the user manual.
　　At ordinary times, the cantilever crane should be inspected more and the machine should be well maintained. Only in this way can the machine be used more smoothly and for a longer time. Therefore, the user needs to be responsible for daily inspection. The main inspection items include the control button to ensure that the electric hoist crane moves normally. The lifting hook lifting equipment and braking equipment will not be abnormal. In particular, the steel wire rope and other equipment need to be lubricated in time, because only through lubrication can the friction be reduced and the service life be extended.
　　At the same time, the workshop technicians need to carry out comprehensive maintenance and repair of the cantilever crane every year, more than twice a year if conditions permit. In the process of repair and maintenance, the shape of the wire rope shall also be tested. Once the actual measured diameter is found to be less than the specified diameter, it should be replaced in time. In addition, the wear of the brake, reducer and sliding wheel shall be checked. If any fracture is found, the worn parts shall be replaced and repaired. It is necessary to check the wear of brakes, reducers and other equipment, and replace them in time in case of fracture and crack.
　　In the daily inspection of cantilever crane, it is also necessary to check the wear of the gate. Once the wear degree reaches more than 50%, the gate and other equipment should be replaced in time to ensure the normal operation of the equipment. At the same time, in order to ensure the integrity of the inspection items, it is necessary to establish a maintenance record card. For the operation of the equipment, each construction personnel shall register in detail.